Boya BY M1 Lavalier Camera microphone
Compare now and find the Best price
The Boya BY-WM8 Pro-K2 UHF Wireless Microphone Set consists of a portable 2-channel receiver, two bodypack transmitters and a lavalier lapel microphone with omnidirectional characteristic (frequency range: 626 - 668MHz). The Boya BY-WM8 Pro-K2 is an enhanced UHF wireless microphone system for recording audio with two-subjects, and it features an easy-to-read LCD screen, wide switching RF bandwidth, PLL-synthesized tuning and digital compand circuits. Including two bodypack transmitters and a receiver with camera mount, it is suitable for electronic news gathering, electronic field productions, film production and more. Easy and flexible wireless synchronization between transmitters and receiver via infrared, and the working range can be up to 100 meters (without obstacles). Up to 48 selectable channels; supports stereo and mono mode; easy-to-read LCD screens and automatic LCD lock function; with selectable mute function; sound control through headphone output (receiver). Suitable for a wide range of wireless applications, such as interviews, electronic news gathering, electronic field productions, film production, business and educational applications and more. Features of the receiver * 48 channels * Maximum bandwidth: 32MHz * Display and function keys * Very simple operation * 3.5mm jack connections * Headphone level: 30mW (16Ohms) * Alignment level: -60dBV * Power supply: 2x AA batteries (not included) * Maximum range: 100meters * Signal/noise ratio: 70dB * Usage time with batteries: up to 4 hours * Dimensions: (wxhxd): 20.8 x 6.7 x 2.9 cm * Weight: approximately 90 grams (without batteries) Features of the transmitter * 48 channels * Maximum bandwidth: 32MHz * Display and function keys * Very simple operation * 3.5mm jack connections * Power supply: 2x AA batteries (not included) * Frequency range of audio components: 20Hz to 20kHz * Maximum range: 100meters * Usage time with batteries: up to 6 hours * Connections: 1x Line In, 3.5mm jack, 1x microphone input, 3.5mm jack * Dimensions (wxhxd): 20.8 x 6.7 x 2.9 cm * Weight: 80 grams (without batteries) Features of the lavalier microphone * Transducer principle: condenser microphone * Directional characteristic: omnidirectional * Frequency range: 35-18,000Hz * Signal to noise ratio: 75dB SPL * Sensitivity: -30dB +/- 3dB (0dB = 1V/Pa at 1kHz) * Connection: 3.5mm stereo jack * Cable length: approximately 1.2 meters Included as standard with the Boya BY-WM8 Pro-K1 UHF Wireless Microphone Set * 1 x portable 2-channel receiver * 2 x bodypack transmitter * 2 x clip-on microphone * 2 x foam windshield * 1 x hot shoe adapter for the receiver * 1 x audio cable from 3.5 mm jack to 3.5 mm jack (length: about 30 cm) * 1 x audio adapter cable from 3.5 mm stereo jack to XLR, 3-pin (length: approx. 30 cm) * 2 x cable clamp (lavalier type) * 1 x user manual * 1 x storage caseFrank
Boya YHF Duo Lavalier Microphone Wireless BY-WM8 Pro-K2The Boya UHF Duo Lavalier Microphone Wireless BY-WM8 Pro-K2 is a wireless microphone set that is ideal for interviews, ENG / EFP, film productions and more. The BY-WM8 Pro-K2 is an upgrade of the BY-WM6 and BY-WM8 wireless duo microphone sets. For example, the pro version has a much lower distortion rate, so that the sound is less distorted. The sound quality has thus been considerably improved. In addition, the set is lighter in weight than its predecessor.Both the transmitters and receiver work on two AA batteries (not included). This allows you to use the microphone set for up to 6 hours. The BY-WM8 Pro-K2 has a maximum range of 100 meters if there are no obstacles between the transmitter and receiver. You can use the BY-WM8 Pro-K2 with DSLR cameras, camcorders and audio recorders. In addition, you can easily connect your mobile phone to the receiver via a smartphone adapter (see optional accessories).Application Boya BY-WM8 Pro-K2The interviewees wear the microphone and transmitter, whereby the latter can be attached to the belt using the supplied clips. You connect the receiver to your camera with a cable. To mount the receiver on your camera, the receiver has a hot shoe connection. This connection has a 1/4 "female thread so that the receiver can also be mounted on a tripod. There is also a headphone output on the receiver, so you can listen to the recorded sound in real time.